The K-PO DG-503 is a High Quality digital SWR & Watt meter

K-PO SWR 420 SWR

• Backlight display / meter: Yes, LCD display
• Impedance: 50 Ohm
• Power range: 300 mW - 300 Watts / 300 - 1200 Watts
• Accuracy: ± 5%
• Minimum Power for SWR: 300 mW
• Insertion loss: Less than 0.1 dB
• Testing function: SWR and Power (FWD and REF)
• Voltage: 13.8 Volt
• Measurement (Analog mode): CW / FM / FDMA
• Measurement (MAX mode): AM / SSB
• Calibration point: 14 / 50 MHz

Electrical data

• Backlight display / meter: Yes
• Impedance: 50 Ohm
• Power range: 20 / 200 / 2000 Watts
• Accuracy: ± 10% of Full Scale or better
• Minimum Power for SWR: 1 Watt
• Insertion loss: Less than 0.1dB
• Testing function: SWR and Power (FWD and REF / AVG and PEP)
• Voltage: 9–14 VDC, 200 mA max.
• Center calibrated: 28.5 MHz
• Backlit: Yes

K-PO TX-102 SWR Powermeter 1.6-200 Mhz 200 Watt

• Backlight display / meter: Yes
• Impedance: 50 Ohm
• Power range: 2 / 20 / 200 Watts
• Accuracy: ± 10% of Full Scale or better
• Minimum Power for SWR: 1 Watt
• Insertion loss: Less than 0.1dB
• Testing function: SWR and Power (FWD and REF / AVG and PEP)
• Voltage: 9–14 VDC, 200 mA max.

• Center calibrate: 1.6-60 MHz (6m/HF) at 28.5 MHz / 140-150 MHz (2mVHF at 145 MHz / 430-440 MHz (70cm/UHF) at 435 MHz

• Backlight display / meter: Yes
• Impedance: 50 Ohm
• Power range: 2 / 20 / 200 Watts
• Accuracy: ± 10% of Full Scale or better
• Minimum Power for SWR: 1 Watt
• Insertion loss: Less than 0.1dB
• Testing function: SWR and Power (FWD and REF / AVG and PEP)
• Voltage: 9–14 VDC, 200 mA max.
• Center calibrate: 140-150 MHz (2mVHF at 145 MHz / 430-440 MHz (70cm/UHF) at 435 MHz

• Backlight display / meter: Yes
• Impedance: 50 Ohm
• Power range: 2 / 20 / 200 Watts
• Accuracy: 5 Watts: AVG ±10%, PEP ±15% / 20 Watts: AVG ±10%, PEP ±15% / 200 Watts: AVG ±5%, PEP ±10%
• Minimum Power for SWR: 1 Watt
• Insertion loss: 0.1 dB
• Testing function: SWR and Power (FWD and REF / AVG and PEP)
• Voltage: 13.8 Volt, for display lightning only