ACOM A2100

• Frequency Coverage: All amateur bands 1.8-54 MHz; extensions and/or changes on request.
• Power Output: 1500 W continuous carrier, no mode limit.
• Intermodulation Distortion: Better than 32 dB below rated output.
• Hum and noise: Better than 40 dB below rated output.
• Harmonic Output Suppression:

-1.8-29.7 MHz - better than 50 dB below rated output;
-50-54 MHz - better than 66 dB below rated output.

• Input and Output Impedances:

- nominal value: 50 Ohm unbalanced, UHF (SO239) type connectors;
- input circuit: broadband, VSWR less than 1.3:1, 1.8-54 MHz continuously (no tunings, no switching);
- bypass path VSWR less than 1.1:1, 1.8-54 MHz continuously;
- output matching capability: better than VSWR 3:1 or greater at reduced output levels.

• RF Gain: 13.5 dB typically, frequency response less than 1dB (50-85W drive power for rated output).
• Primary Power: 85-132 V and 170-264 V (100, 110,120, 200, 210, 220, 230 & 240 V nominal taps,+10%-15%tol.), 50-60 Hz, single phase, 3500 VA consumption at rated output.
• Complies with CE safety and EMC requirements, as well as FCC regulations.
• Size & Weight :

operating: WxDxH: WxDxH: 445x375x205 mm, 29.3 kg.
(17.52x14.76x8.07 inches, 64.6 lbs)

• Operating environments:

-temperature range: 0...+50 degs.Celsius;
-humidity: up to 95% @ +35 degs.Celsius;
-height: up to 3000 m (10000 ft) above sea level without output deterioration.